American-magnetics 12200PS DC Power Supply (CE-Marked) Bedienungsanleitung PDF herunterladen (Seite 14)

OPERATING MANUAL FEATURES AND SPECIFICATIONS

Release 1.0 (98/07) 1-5

1.3.5 Remote Programming and Monitoring

Remote Analog Programming (Full Scale Input) Voltage and current programming:

0-5k, 0-10k resistances; 0-5V, 0-10V voltage sources

Remote Monitoring Output voltage and current: 0-5V, 0-10V

0 to full scale output 1% accuracy.

Maximum Remote Sense Line Drop Compensation 5V/line (Line drop is subtracted from total voltage

available at supply output.)

Remote Start/Stop and Interlock 2.5-15V signal or TTL-compatible input, selectable logic

Optional Isolated Program and Readback (V&I) 0-5V (ISOL Interface)

Optional Digital Control RS-232, GPIB Interfaces

1.3.6 Environmental Specification

Operating Temperature Range 0°C to 50°C

Storage Temperature Range -20°C to +70°C

Humidity Range 30% to 90% RH Non-condensing

Operating Altitude Derate maximum operating temperature by 1°C per 1,000

feet (300 m) for operation between 5,000 feet (1500 m)

and 15,000 feet (4500 m).

Storage Altitude Up to 50,000 feet (15 000 m).

Installation Category Intended for use in installation category (overvoltage

category) II (IEC 1010-1 standard).

1.3.7 Mechanical Specification

Front Panel Control 10-turn voltage and current potentiometers

Front Panel Voltage Control Resolution 0.02% of V max

Meter Accuracy See Table 1.3-1 and Table 1.3-2

AC Input Connector Type 3-terminal, 34A, 250V, right angle, PC mount,

wire clamp connector with strain relief cover

Output 7.5V to 100V models: nickel-plated copper bus bars with

bus bar cover and strain relief; bus bar holes: 0.343"

(8.7 mm) D (1), 0.197" (5.0 mm) D (2);

150V to 600V models: 4-terminal, right angle, PC mount,

wire clamp connector

Sense Connector 5-terminal wire clamp connector (2 piece)

Analog Programming Connector 15-terminal wire clamp connector (2 piece)

Chassis Ground One chassis ground screw located on rear panel for

bonding connections

Cooling Fan cooled. Air exhausts to rear. Over temperature

shutdown: automatic restart or latch off.

Mounting Removable rack mount brackets. Mount at front panel or

mid-chassis location.

Weight Approximately 33 lbs. (15 kg)

Approvals CE-marked units meet IEC 1010-1 safety standard and

EN50081-2 and EN50082-1 EMC standards. Additional

standards: CSA C22.2 No. 1010.1, UL 3101, and FCC,

part 15, class A EMI standard.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 57 58

Kommentare zu diesen Handbüchern

Keine Kommentare

American-magnetics 12200PS DC Power Supply (CE-Marked) Bedienungsanleitung Seite 14

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung American-magnetics 12200PS DC Power Supply (CE-Marked)